SILICATE “EMEX” EXTERIOR EMULSION PAINT

    At the bottom of this presentation, you will find the instructions and complete technical data of the product, according to label attached to the navigation menu.

Description

     The Silicate “Emex” Exterior Emulsion Paint is a hydro-soluble dispersion product, based on potassium silicate, additives and fillers, for finishing the exterior plasters, with high degree of white, high adherence and resistance and self-cleaning effect. This type of paint has the advantage that does not allow the adherence of dirt to the surface where it was applied, and it can be easily removed by washing. It is especially indicated for the restoration works of buildings and monuments. It can be colored using coloring pastes, or it can be delivered to the requested color.

Main characteristics:

1. Special adherence to the support;
2. High covering power;
3. High degree of white;
4. High washability;
5. High mechanical strength;
6. Resistance to fungi and molds;
7. High ageing and UV resistance;
8. Environmentally safe character.
9. High resistance to weather, temperature variations, humidity.

Utilization Domains

     The Silicate “Emex” Exterior Emulsion Paint, unlike classic emulsion paints, does not form only a thin film on the coated surface, but penetrates the support, forming one piece with it and enhancing it.

     It is used for covering the following types of surfaces: concrete, masonry, cement plaster, old resistant and compact plasters, cement mineral plasters, absorbent mineral conglomerates of any type, old organic or mineral paintings, dry, compact and absorbent paintings

The Silicate emulsion paint will not be applied on gypsum boards, gypsum or lime plaster, old layers of paint rich in resins, synthetics and resins, acrylic paints, paints with gum or casein, dopes, oil paints, soft and elastic surfaces, etc..

     It is recommended to remove any old paint and preliminary test each type of support on which the paint will be applied.

     Support preparation prior to applying silicate primer, will be made only by grinding.

     Areas affected by mold or fungi will be cleaned with  “Emex” Forte Sanitizer. Prior to applying paint, surfaces will be prepared with Silicate “Emex” Primer wall.

     This emulsion paint is also recommended as a background layer for - Decorative Silicate “Emex” Plaster.

     To obtain maximum performance read carefully the Application Instructions and Technical Data Sheet, available in the menu below.

Tehnical Features