SILICONE BASE COAT WITH QUARTZ FOR PRIMING “EMEX” PLASTERS

    At the bottom of this presentation, you will find the instructions and complete technical data of the product, according to label attached to the navigation menu.

Technical Data

Utilization

Generalities

Description

     The Silicone Base Coat with Quartz for Primingi “Emex” Plasters is a professional hydro-soluble product, based on acrylic polymers, silicone resin, specific additives, fillers and quartz, for superior preparation of exterior surfaces, in order to cover them with structured silicone decorative plasters. The quartz which exists in the product creates anchor points at the surface, determining a maximum adhesion of the plaster to the support. The product has an excellent elasticity and protective properties against fungi, bacteria and molds.

Main characteristics:

1. High adhesion to the support;
2. A high power of filling the pores;
3. Low drying time;
4. Reduces absorption capacity;
5. Water impermeability;
6. Increases the adherence of the plaster to the support;
7. Resistance to fungi and molds;
8. Keeps support permeability to air;
9. Reduces the support absorption.

Technical Data

Utilisation

Generalities

Utilization Domains

     The Silicone Base Coat with Quartz for Priming “Emex” Plasters is used for preparation of exterior surfaces of civil and industrial buildings, new or old, in order to coveri them with structured decorative plasters.

     The role of this base coat is both to increase the plaster adhesion to the support, with the help of quartz particles existing in the product and to prepare the surface by closing the pores and thus decreasing the absorbability of the support. It is impermeable to water but allows support breathing, which ensures the occurrence of dampness..

     It is highly recommended for the new buildings, “which still function”, due to its excellent elasticity.

     It is used as intermediary layer for covering the following types of surfaces: concrete, masonry, lime and cement plaster, lime or gypsum plasters and polishing plaster coats, new or old plaster based on binding material, gypsum board, absorbent mineral conglomerates of any type, old organic or mineral paintings, dry, compact and absorbent paintings.

     For cleaning traces of dampness or of existing molds it will usesi Forte “Emex” Sanitizer.

     Although there are no restrictions on using this base coat, it is recommended in system with “Emex” Decorative Silicone Plaster and background layer “Emex” Exterior Silicone Emulsion Paint.

     To obtain maximum performance read carefully the Application Instructions and Technical Data Sheet, available in the menu below.

Tehnical Features

Technical Data

Utilization

Generalities