“EMEX” QUARTZ PRIMING BASE COAT FOR PLASTERS

    At the bottom of this presentation, you will find the instructions and complete technical data of the product, according to label attached to the navigation menu.

Description

     The “Emex” priming base coat with quartz for plasters is a professional hydro-soluble product, based on acrylic polymers, specific additives, fillers and quartz, for the superior preparation of exterior surfaces, in order to cover them with structured acrylic decorative plasters. The quartz which exists in the product creates anchor points at the surface, determining a maximum adhesion of the plaster to the support. It is a very effective base coat with protective properties against fungi, bacteria and molds.

Main characteristics:

1. High adhesion to the support;
2. A high power of filling the pores;
3. Low drying time;
4. Reduces absorption capacity;
5. Water impermeability;
6. Increases the adherence of the plaster to the support;
7. Resistance to fungi and molds;
8. Keeps support permeability to air;
9. Reduces the support absorption.

Utilization Domains

     The “Emex” Acrylic Base Coat with Quartz for Priming Decorative Plasters is used for preparation of exterior surfaces of civil and industrial buildings, new or old, in order to cover them with acrylic decorative plasters.

     The role of this base coat is to increase the plaster adhesion to the support, with the help of quartz particles existing in the product and to prepare the surface by closing the pores and thus decreasing the absorbability of the support. It is impermeable to water but allows support breathing, which ensures the occurrence of dampness.

     Due to its affordable price and exceptional performances is the most practical priming system for decorative plasters.

     It is used as intermediary layer for covering the following types of surfaces: concrete, masonry, lime and cement plaster, lime or gypsum plasters and polishing plaster coats, new or old plaster based on binding material, gypsum board, absorbent mineral conglomerates of any type, old organic or mineral paintings, dry, compact and absorbent paintings.

     For cleaning the traces of dampness or of existing mold it will use Forte “Emex” sanitizer.

     Although there are no restrictions on using this base coat, it is recommended in system with “Emex Quartz Dekor” Structured Decorative Plaster and background layer “Emex” Exterior Superwashable Paint..

     To obtain maximum performance read carefully the Application Instructions and Technical Data Sheet, available in the menu below.

Tehnical Features